
Add to Cart
High Efficiency CE Approved Micro Biogas CHP Mini Cogenerator Set Unit System 16kw 20kva
Multiple Units Been Installed Around The World
INTRODUCTION ON SEVENPOWER COGENERATOR
- Powered by 4cylinders water-cooled type internal combustion engine
- Engine RPM1500,longer service life
- Integrated control cabinet
- Safe gas train
- Advanced gas engine control system, ignition system, speed control system, air/fuel ratio control system
- 3 steps heat recovery, high overall efficiency
- Soundproof canopy fully open design, easy for maintenance work
- Super silent design, lower noise level suitable for residential area
- Low exhaust emissions
- Auto Lambda control
- All necessary engine protections, oil pressure, water temperature, over current, over voltage, overload, engine speed, frequency protection, battery voltage
- Easy control system, all information easily read from the controller screen, power output,voltage,current,power factor, engine speed,oil pressure,coolant temperature,battery voltage,run hours,start numbers,alarms,historical records
Composition | Content |
CH4 | ≥55% |
fluctuations value of biogas in pipeline | <0.2Kpa |
hydrogen | <10% |
sulfide, including hydrogen sulphide | <200mg/m3 |
chlorine fluorine compounds,mainly chlorofluoromethane | <15mg/m3 |
silicium | <0.7mg/m3 |
ammonia | <15mg/m3 |
liquid oil and hydrocarbons | <50mg/m3 |
particles | <50μm Impurity content<40mg/m3 |
CHP Main Specifications
Item | Model | SP16B | ||
fuel | — | Biogas | ||
marks | — | Synchro Type | ||
kVA/kWe | Continuous Power | |||
20/16 | ||||
thermal output(KWt) | kWt | 33.2 | ||
electrical efficiency | % | 28.2% | ||
thermal efficiency | % | 58.5% | ||
overall efficiency | % | 86.7% | ||
frequency | Hz | 50 | ||
voltage | V | 400/230 | ||
gas inlet pressure | kPa | 3-5kpa | ||
biogas consumption | m3/kW.h | 0.495 | ||
Certificate | — | CE | ||
Controller | Brand | ComAp | ||
Engine | Engine model | — | SP-4JB1 | |
Engine brand | — | prototype Isuzu 4JB1 | ||
Engine type | — | 4 cylinders,4stroke, 16valves, water-coolled | ||
RPM | — | 1500 | ||
Compression Ratio | — | 11.5 | ||
Displacement | — | 2.77L | ||
Bore×Stroke | mm | 93×102 | ||
Oil capacity | — | 5.5L | ||
Charging voltage/current | — | 12V/6A(DC) | ||
Starting system | — | Electic-start |
Micro CHP On Site Picture
For more information about each CHP, please consult with your sales representative.Thanks.
More Information About Our Factory
Our Packing
Our Hannover Exhibition
Our Showroom In Germany
Our Customers' Visiting