
Add to Cart
EU CE Certification Water Cooled 100kw Cummins Natural Gas Generator With CHP
Why choose our CHP?
- With CE certification.
- Comprehensive heat insulation to minimize heat loss and with high overall efficiency
- CHP inner pipelines are made of full stainless steel material.
- Maximum lower the noise level ensure the CHP is available to run in office building and residence site.
- Fully open design, maintenance friendly thanks to easy access.
- Environmentally friendly design.
- Long time Rearch & Design and testing ensure high reliability.
- With more than 15years experience in CHP.
- Distributors in Europe for better after-service.
Main Characters
- Water-cooled 4-cylinders engine suitable for 24hours continuous running and low speed lower noise level.
- Catalyst converter and lambda auto control for different emissions level requirements in different area and country.
- Meccalte alternator
- ComAp controller
- Recover heat from engine jacket water and exhaust
- Sevenpower exhaust heat exchanger made of full stainless steel material which is with longer service life
Item | Model | SP110N | |
fuel | — | Natural Gas | |
marks | — | Synchro CHP | |
CHP | electrical output(KWe) | kVA/kWe | Continuous Power |
125/100 | |||
thermal output(KWe) | kWt | 140 | |
electrical efficiency | % | 30.8% | |
thermal efficiency | % | 52.7% | |
overall efficiency | % | 83.5% | |
frequency | Hz | 50 | |
voltage | V | 400/230 | |
gas inlet pressure | kPa | 3-5 | |
dimension (soundproof type) | mm*mm*mm | 2600*1550*1650 | |
net weight | kg | 2700 | |
NG consumption | m3/kW.h | 0.296 | |
db(A)@7m | — | 58 | |
Certificate | — | CE | |
water-water heat exchanger | — | SWEP | |
water-exhaust heat exchanger | — | designed by our own factory/made of full stainless steel | |
ignition system | — | Impco | |
speed governor | — | Woodward | |
mixer | — | Venturi type | |
gas filter | — | Madas | |
zero regulator | — | Kromschroeder | |
solenoid valve | — | Kromschroeder | |
gas pressure gauge | — | Dungs | |
Lambda auto control | — | Available on request with extral cost | |
catalyst converter | — | Available on request with extral cost | |
MCB | — | ABB | |
GCB | — | ABB | |
Controller | ComAp IC | ||
Engine | Engine model | — | SP-6CTA |
Engine type | — | 6 cylinders,4stroke,water-coolled | |
RPM | — | 1500 | |
Compression Ratio | — | 10.5 | |
Displacement | — | 8.3L | |
Oil capacity | — | 19L | |
Charging voltage | — | 24V(DC) | |
Charging current | — | 5A(DC) | |
Starting system | — | Electic-start | |
Alternator | model | — | Meccalte |
phase | — | 3 phase 4 wires | |
insulation system | — | class H | |
protection | — | IP23 | |
Cooling Type | — | air cooled |
Our Packing
Our Hannover Exhibition
Our Showroom In Germany
Our Customers' Visiting
For more information about our products, please feel free to contact with our sales team.