Chengdu Sevenpower Generating Equipment Co., Ltd.
Chengdu Sevenpower Generating Equipment Co., Ltd. We Make Power More Green
Add to Cart
Remote Control 220KW 280KVA 3 Phase Biogas Genset 400V / 230V Clean Power CE Approved
Characters
Environmentally friendly design.
Long time R&D and testing ensure high reliability.
Maximum lower the noise level.
Maintenance friendly thanks to easy access.
Control module has indicators for failure information:
Over-speed/under-speed,
Emergency stop
Low oil pressure;
High water temperature
Failure to start
Overload
Mains failure
Synchronization failure
Speed governing limit
Phase missing
CHP Main Specifications
| Model | SP220B | |
| fuel | — | Biogas |
| marks | — | Synchro Genset |
| electrical output(KWe) | kVA/kWe | Continuous Power |
| 280/220 | ||
| frequency | Hz | 50 |
| voltage | V | 400/230 |
| gas inlet pressure | kPa | 3-5 |
| dimension (soundproof type) | mm*mm*mm | 3500*1800*2000 |
| net weight | kg | 4000 |
| Biogas consumption | m3/kW.h | 0.41 |
| Biogas consumption for one hours | m3/h | 102.5 |
| db(A)@7m | — | 59 |
| Certificate | — | CE |
| ignition system | — | Altronic |
| speed governor | — | Woodward |
| gas filter | — | Madas |
| zero regulator | — | Kromschroeder |
| MCB | — | ABB |
| GCB | — | ABB |
| Controller | ComAp | |
| Engine model | — | MAN MT13 |
| Engine type | — | 6 cylinders,4stroke,water-coolled |
| RPM | — | 1500 |
| Compression Ratio | — | 11.5 |
| Displacement | — | 12.419L |
| Oil capacity | — | 40L |
| Charging voltage | — | 24V(DC) |
| Charging current | — | 5A(DC) |
| Starting system | — | Electic-start |
| Alternator model | — | Meccalte |
| phase | — | 3 phase 4 wires |
| insulation system | — | class H |
| protection | — | IP23 |
| Cooling Type | — | air cooled |
Biogas Requirements
| Composition | Content |
| CH4 | ≥55% |
| fluctuations value of biogas in pipeline | <0.2Kpa |
| hydrogen | <10% |
| sulfide, including hydrogen sulphide | <200mg/m3 |
| chlorine fluorine compounds,mainly chlorofluoromethane | <15mg/m3 |
| silicium | <0.7mg/m3 |
| ammonia | <15mg/m3 |
| liquid oil and hydrocarbons | <50mg/m3 |
| particles | <5μm Impurity content<30mg/m3 |
For more information about each CHP, please consult with your sales representative.Thanks.