
Add to Cart
RPM1500 Internal Combustion Engine 200KVA AC Three Phase Natural Gas Generator Set
1. Methane should be no less than 85%
2. The natural gas temperature should be between 0-40 ℃
3. No impurity in the gas. Water in the gas should be no more than 20g/Nm3.
4. Heat value should be no less than 8500kcal/m3
5. Gas pressure should be 3-7KPa, if not,booster fan or reducer is required.
Control Features
- The monitor and display on the voltage, current, frequency, active power, apparent power, power factor of the generated electricity / grid electricity.
- The monitor and display on the genset’s water temperature, oil pressure, rotational speed, battery voltage, running hours, accumulative total power and number of starts.
- Protection alarm and fault automatic storage on high water temperature, low oil pressure, double speeding, over current, over voltage, over frequency and phase failure etc.
Main Specifications
Model | SP200N | |
fuel | — | Natural Gas |
marks | — | Synchro Genset |
electrical output(KWe) | kVA/kWe | Continuous Power |
200/160 | ||
frequency | Hz | 50 |
voltage | V | 400/230 |
gas inlet pressure | kPa | 3-5 |
dimension (soundproof type) | mm*mm*mm | 2900*1600*1800 |
net weight | kg | 3500 |
NG consumption | m3/kW.h | 0.28 |
db(A)@7m | — | 59 |
Certificate | — | CE |
ignition system | — | Impco |
speed governor | — | Woodward |
mixer | — | Venturi type |
gas filter | — | Madas |
zero regulator | — | Kromschroeder |
solenoid valve | — | ABB |
gas pressure gauge | — | ABB |
MCB | — | ABB |
GCB | — | ABB |
Controller | ComAp | |
Engine model | — | STEYR T12 |
Engine type | — | 6 cylinders,4stroke,water-coolled |
RPM | — | 1800 |
Compression Ratio | — | 11.0 |
Displacement | — | 11.6L |
Oil capacity | — | 24L |
Charging voltage | — | 24V(DC) |
Charging current | — | 5A(DC) |
Starting system | — | Electic-start |
Alternator model | — | Meccalte |
phase | — | 3 phase 4 wires |
insulation system | — | class H |
protection | — | IP23 |
Cooling Type | — | air cooled |
3*200KW in Parallel on site
For more information about the Generator Set, please consult with your sales representative.Thanks.
More Information About Our Factory
Our Packing
Our Hannover Exhibition
Our Showroom In Germany
Our Customers' Visiting